Voopoo Drag Max: How To Troubleshoot Your New Vape

So, you just bought your very first vape and its acting up. Don’t worry even tough and high-end models like the Voopoo Drag Max act up every now and then. Most times, it’s a very simple fix and doesn’t indicate a defect in the device. Vapes usually act up when you’re either using them wrong or haven’t changed the coil in time. There are a number of issues that you could face when it comes to your Voopoo Drag Max device.

Since we’re a leading vape store, we thought we’d help you understand why your device may be acting up and how you can fix it. So, if you need help troubleshooting your device for some common issues, read on!

Vapourz Guide to Troubleshooting Your Voopoo Drag Max

There are a few common issues you may face with your Voopoo Drag Max, but don’t worry! We’re here to tell you how to fix them.

1. Device Not Turning On?
   

   One of the most common issues people face with their vapes is the device not turning on. Some people even complain that their devices don’t turn on even after charging them. Here are a few solution to this surprisingly common problem:
   Fix #1: If you’re struggling with your device not turning on, it could be an issue with the board. It could be an underlying issue related to board failure. If this is the case, you need to get a new board. You can find them on our online shop, or a vape store near you!
   Fix #2: Apart from the first fix, you can also try switching off the device before taking its batteries out to see if the device is working or not.

2. Device Not Charging?
   

   Another very common issue users face with their devices is the device not charging. Most people face this issue, or the issue of the LED indicators not turning on. It can be a very frustrating issue to deal with, but here are some solution that may help you:
   Fix #1: Try not to charge the batteries with the mod attached. You should buy a backup external charger and extra batteries.
   Fix #2: Another reason your vape isn’t charging could be because you’ve overcharged it. It could also occur due to the struggle for balance in the circuit. Or it could be a bad battery cell. Oftentimes, insufficient supply of power is the cause of this problem.
   Fix #3: Try using a lower power charger. This trick has worked for a few users. A lot of devices work well with less power output. Try this out, and if it doesn’t solve your issue try fix #1 or #2.

3. Device Not Reading Ohms?
   

   Fix #1: Try using the cord that came with your device. You have to ensure its properly connected in the right direction, all the way in.
   Fix #2: You can also try using a PC to charge your device.
   Fix #3: You can try using a 2amp charger. This fix has worked for many users.

4. Device not reading Atomizer?
   

   A very common problem is your Voopoo Drag Max not reading the atomizer. This issue occurs when your mod can’t identify the coil due to a short circuit. Try these solutions:
   Fix #1: Use a pin to connect the 510 connectors and see if the issue is resolved. If it isn’t, move onto the next solution.
   Fix #2: If the first solution doesn’t work, try using a different coil or a different tank. You can also try to check the same tank on another mod to see if the issue lies with your tank itself. This way you can tell whether the problem is with your mod or your tank.

5. Device Not Firing?
   

   Is your vape not firing even when you press the button? Here are some solutions to this problem:
   Fix #1: The device may not be firing due to a leakage of e-liquid. Make sure that there isn’t an accidental leak. If there is a leak, clean it with something delicate like cotton. Make sure you take the batteries out while doing this.
   Fix #2: If you think the issue may be due to a manufacturing error, reach out and see if you can get a replacement device or a refund.

6. Device Leaking?
   

   Is your vape constantly leaking vape juice? This is a surprisingly common issue. Here are a few solutions:
   Fix #1: When you replace your coil or restore it, make sure you attach it to the atomizer first. This way, you’ll know if it’s tightened properly.
   Fix #2: Another reason your device is leaking could be because the cotton inside has gotten too wet. If this is the source of your issue. All you have to do is clean it.

Conclusion

 We hope this short guide to troubleshooting your Voopoo Drag Max helped! If you have any more questions, feel free to contact us. Check out our online shop for all things vape-related! You won’t be disappointed with our range.